HIKVISION  DS-3E1106P-EI/M, 4 Port Fast Ethernet Smart POE Switch

HIKVISION  DS-3E1106P-EI/M, 4 Port Fast Ethernet Smart POE Switch

Overview :

• - 4 × 10/100 Mbps PoE port,2 × 10/100 Mbps RJ45 port

• - Total PoE Power Budget 45W

• - Support 802.1Q VLAN

• - Support PoE watchdog to detect and restart the cameras that do not respond

• - Support STP/RSTP Loop prevention

• - Support cable detection to locate failure

• - Up to 300 m Long Range PoE Transmission

• - 6KV Surge Protection

General :

• Shell : Metal material

• Net Weight : 0.27 kg (0.6 lb)

• Gross Weight : 0.77 kg (1.7 lb)

• Dimensions (W × H × D) :

  • 121.1 mm × 27.6 mm × 83.1 mm (4.77'' × 1.09'' × 3.27'')

• Operating Temperature : 0 °C to 40 °C (32 °F to 104 °F)

• Storage Temperature : -40 °C to 85 °C (-40 °F to 185 °F)

• Operating Humidity : 5% to 95% (no condensation)

• Relative Humidity : 5% to 95% (no condensation)

• Power Supply : 54VDC, 0.92A

• Installation Mode : Desk-Mounted,Wall-Mounted

• Max. Power Consumption : 50 W

• Power Consumption in Idle : 1.8 W

• Surge Protection : 6 KV

Network Parameters :

• Ports :

  • 4 × 10/100 Mbps PoE port

  • 2 × 10/100 Mbps RJ45 port

• MAC Address Table : 2 K

• Switching Capacity : 14 Gbps

• Packet Forwarding Rate : 10.42 Mpps

• Internal Cache : 1 Mbits

PoE Power Supply :

• PoE Standard : IEEE 802.3af,IEEE 802.3at

• PoE Power Pin : End-span: 1/2(-), 3/6(+)

• PoE Port : PoE: Ports 1 to 4

• Max. Port Power : 30 W

• PoE Power Budget : 45 W

Software Function :

• Long Range :

  • Ports 1 to 4: up to 300 m.

  • Long range performance may vary depend on
          camera model or cable condition.

•  VIP Port :

  • Ports 1 to 2: data on VIP ports is preferentially forwarded
          when bandwidth resources are insufficient.

•  Port Isolation :

  • Ports 1 to 4: port isolation mode to improve network security

  • Ports in an isolation group cannot communicate with each
          other, but they can communicate with ports outside the
          isolation group.

• PoE Watchdog :

  • Ports 1 to 4: auto detect and restart the cameras that do not respond.

• Link Aggregation :

  • Link aggregation is used to aggregate multiple physical ports
          to form a logical port for load balancing, bandwidth expansion,
          and port protection.

  • Support static link aggregation.

  • Support 2 aggregation groups.

•  Loop Prevention :

  • Loop prevention is used to prevent the switching network from
         forming loops, which will seriously affect network communication

  • Disabled by default.

• Support 802.1D STP.

• Suppport 802.1w RSTP.

•  VLAN :

  • VLAN is used for network scale planning and
          network health improvement.

  • Support 802.1Q.

  • Configurable VLAN ID from 1-4094.

  • Support Trunk, Access port mode.

  • Support Max. 32 VLAN

•  HPP :

  • Support one-click activation and remote management via
          Hik-Partner Pro. Functions supported :

    • Display the port rate.

    • Display the port bandwidth utilization rate.

    • Display the PoE power usage.

    • Display topology information.

    • Display the alarm status.

    • Restart ports and devices.

    • Enable port long-rage mode.

    • Remotely upgrade the device.

System Maintenance :

• Support device management via web.

• Support DHCP Client.

  • Enabled by default for dynamic assignment of
          management IP addresses.

• Support Super IP

  • Which is a fixed IP address (10.180.190.200) for direct access.

• Support management via Hik-Central Pro.

• Support remote management via Hik-Partner Pro.

• Support cable detection.

  • Abnormal open circuits and short circuits as well as
         network cable length can be detected.

• Supports 802.1ab LLDP for peer device discovery.

• Support port mirroring for fault locating.

Approval :

• EMC : 

  CE-EMC

  • EN 55032: 2015+A11: 2020

  • EN IEC 61000-3-2: 2019

  • EN 61000-3-3: 2013+A1: 2019

  • EN 50130-4: 2011+A1: 2014

  • EN 55035: 2017+A11: 2020

• Safety :

  • CB

    • AMD1:2009

    • AMD2:2013

    • IEC 62368-1: 2014 (Second Edition)

  • CE-LVD (EN 62368-1: 2014+A11: 2017)

• Chemistry :

  • Reach (Regulation (EC) No.1907/2006)

  • WEEE (2012/19/EU)

  • CE-RoHS (2011/65/EU)